<

CNYMRA - District 3 MX

CLASSIFIED SECTION FOR INDIVIDUAL BUYING/SELLING ONLY - NOT FOR COMMERCIAL ADVERTISING

All other posts will be removed.

Registration is required to post your ad here. You may choose your own User Name and password. A valid e-mail address is required.

Members Login
Username 
 
Password 
    Remember Me  
 
CNYMRA Main Page -> CNYMRA Classifieds -> CNYMRA Classifieds -> help cr 125
Post Info TOPIC: help cr 125
hondacr

Amateur Poster

Status: Offline
Posts: 41
Date:
help cr 125
Permalink  

i have a 2003 cr 125 that does not want to shift into 2nd, but every now and then it will go into 2nd smoothly. once i get it into 2nd it goes through all the other gears good. when i try to go into 2nd i some times here a grinding sound.

__________________
TKR911Brappin

Pro Poster

Status: Offline
Posts: 539
Date:
Permalink  

hows your clutch plates?? Check your gear box and make sure all sprockets have good teeth, and then go from there, most likely you should find your problem if not let me know....

__________________

teamkawy55

Pro Poster

Status: Offline
Posts: 920
Date:
Permalink  

After I did the clutch in my bike I had this same problem. Then I realized the little spline that comes out of the clutch case where the cable connects to was turned forward too far, it wasnt engaging the clutch all the way alls I had to do was slide the case off spin the spline back like 2 teeth or less and it was fine. Maybe that will work, maybe not but goodluck!

__________________
jcbemer

Expert Poster

Status: Offline
Posts: 100
Date:
Permalink  

have you moved your shifter since the problem. I did it on my rm 125 and had the same problem moved it back where it wasnt hitting anything and problem solved.


__________________

Our greatest glory consists not in never falling, but in rising every time we fall
ralphfranco

Expert Poster

Status: Offline
Posts: 382
Date:
Permalink  

sounds like shifting fork dude


__________________
tldfastman

Expert Poster

Status: Offline
Posts: 224
Date:
Permalink  

there is a clip that is behind where the shaft goes in to the motor. mine fell of and it did the same thing, i got it fixed and worked fine. you have to split the cases to get to it. i had aden at binghamton honda do it but hes not there anymore.

__________________
Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.
CNYMRA Main Page -> CNYMRA Classifieds -> CNYMRA Classifieds -> help cr 125
Tweet this page Post to Digg Post to Del.icio.us