What you can do, is where your recoil goes in, take a hammer and lightly tap it till it pulls back in. If it doesnt, remove it with whatever holds it on and it should come off. Then you take it to someone that knows how to repair it, like a ski-doo shop or I know a guy that works on sleds, his name is Cricket. His number is 1-315-568-6500. Tell him what is wrong and he can tell you how to fix it or ask you to bring it to him. If you can get it back in without it being taken off, after it gets warmed up again, it will work just fine, sometimes it just gets cold and hangs up, it happens to my sled all the time. If you need any more help, you can call me at 1-315-871-6699, ask for William.

-- Edited by podolak at 19:06, 2008-12-14

well, on mine, it bolts right into the engine and your cleat dogs might be frozen up inside so it might just need to be warmed up, so if your going to start it, make sure you are ready to ride b/c your going to need to start it, then it will pull itself in or you'll have to tap on it, then go ride it for awhile and it will be warm and when you go to pull it, it should be free. If that doesn't work, then your cleat dog may be stuck in it, or your spring may be too tight or too loose to not let it move. It was happening when my dad and i were riding today. We went out to get the dinosaurs out of the barn and his cable just stuck, so we tapped it and it went back it, then it started, we rode forever and it just worked when we went to ride again.

-- Edited by podolak at 19:32, 2008-12-14

Yeah, right where the string goes into the cover, you just tap lightly on it with a hammer or something heavy. But dont tap it too hard and break it, if your easy but put some pressure into it, the vibration should pull it right back in, is it stuck all the way out?

ok, well tomorrow or when you have time, go tap it lightly and see if it goes in if not give that guy a call or try putting a heat source next to it before you take it off so it gets warm, if it doesnt work just call that guy or someone to help

there really is nothing you can do, it happens because the sled engine gets cold and it sticks a little bit. It happens on my dads junker all the time. All you have to do is tap it, start it, ride it, then if you let it sit forever it might do it again. If you ride it everyday till it gets warm or so....then it shouldn't stick, it just depends on how much of an avid rider you are. If you ride everyday it wont, but it is probably just a little stuck because it has been sitting since last year, am i right?

ok, that might work

simple fix!!! take the cover off and either respring the coil on it or you might need to buy a new coil. i bet it just sliped out of place

i don't know about that, but you might need clutch dogs and maybe a new recoil if it froze.....if it doesnt work feel free to call me in the afternoon, around 3:15

carl t rocks in parish has rebuild kits for under 40

ANY CHANCE OF FIXING IT YET???

Any chance i can buy a metal one aftermarket? I tried to fix it today but it has been raining so I didnt get in too deep. I cant get at the mechanism without removing the expansion chamber...the problem is that I cant figure out what tool can possibly get the 4 springs off that connect it to the Y-pipe. I tried every different type of plyer that I own and I was only able to get the springs off of the other side that connect to the muffler.

im not sure, but you could go to stones today, their open until 9pm, but they open at 7pm