<

CNYMRA - District 3 MX

CLASSIFIED SECTION FOR INDIVIDUAL BUYING/SELLING ONLY - NOT FOR COMMERCIAL ADVERTISING

All other posts will be removed.

Registration is required to post your ad here. You may choose your own User Name and password. A valid e-mail address is required.

Members Login
Username 
 
Password 
    Remember Me  
 
CNYMRA Main Page -> CNYMRA Classifieds -> CNYMRA Classifieds -> need help
Post Info TOPIC: need help
lsf_champ_22

Pro Poster

Status: Offline
Posts: 1088
Date:
need help
Permalink  

i have a 04 yfz450 that i am having some problems with the tether working right, the quad came with a tether on it but wasent wired up so i wired it to the stock engine shut off switch on the bars and it didnt work right i switched my wires thinking i got them backwords and it didnt solve it, it works but not right when the clip for the tether is in it wont start but when you pull the pull cord out it will start, then i was told their are a couple different tethers something like a normally open and normally close tether? so i figered i had the wrong one so i bought one off of ebay that came off a 05 yfz450 that worked but i wired it up to mine and its still doing the same thing as old one.... can anyone help me out



__________________
all in balls out racing
lsf_champ_22

Pro Poster

Status: Offline
Posts: 1088
Date:
Permalink  

bump...



__________________
all in balls out racing
quadrideryfz

Pro Poster

Status: Offline
Posts: 815
Date:
Permalink  

you need the tether  for the proper  ignition system you have the wrong one obviously...pingel  is the only one i know of that makes the right tether you can go direct to the stock wires....pro armor  sells  a kit  with directions  for theres...you can hook a prodesign up the same way...but its grounding the stator out...not the best idea if you use it regularly.....



__________________
250RNUT

Expert Poster

Status: Offline
Posts: 304
Date:
Permalink  

Maybe do some research but I think you need this adapter for the YFZ's

http://www.baldwinmotorsports.com/products/yfz450-04-08-kill-switch-installation-kit

__________________
quadrideryfz

Pro Poster

Status: Offline
Posts: 815
Date:
Permalink  

250RNUT wrote:

Maybe do some research but I think you need this adapter for the YFZ's

http://www.baldwinmotorsports.com/products/yfz450-04-08-kill-switch-installation-kit

 

 

im pretty sure thats one of the kits that more less grounds the stator out, would work fine  though



__________________
gyz250

Expert Poster

Status: Offline
Posts: 346
Date:
Permalink  

you switching wrong wires you need to interupt hot wire going to coil from stator with a normally open switch

__________________
lsf_champ_22

Pro Poster

Status: Offline
Posts: 1088
Date:
Permalink  

i figered it out the teather on the quaad wasent any good but i got it now thanks everyone



__________________
all in balls out racing
Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.
CNYMRA Main Page -> CNYMRA Classifieds -> CNYMRA Classifieds -> need help
Tweet this page Post to Digg Post to Del.icio.us