<

CNYMRA - District 3 MX

CLASSIFIED SECTION FOR INDIVIDUAL BUYING/SELLING ONLY - NOT FOR COMMERCIAL ADVERTISING

All other posts will be removed.

Registration is required to post your ad here. You may choose your own User Name and password. A valid e-mail address is required.

Members Login
Username 
 
Password 
    Remember Me  
 
CNYMRA Main Page -> CNYMRA Classifieds -> CNYMRA Classifieds -> need yamaha snowmobile help
Post Info TOPIC: need yamaha snowmobile help
lsf_champ_22

Pro Poster

Status: Offline
Posts: 1088
Date:
need yamaha snowmobile help
Permalink  

just bought a 97 vmax sx 700 tripple and i always find myself standing up so i want to put bar risers on it i was going to do this with my old sled that was a 2000 sxr700 and i started buying the stuff i have 6 inch riser block and sno cross bars but need the cable extentions i found the break cable extention just fine but yamaha ran this stupid design on the 2 stroke sleds where the throtal cable is a duel cable and i cant find anything that i think will work to extend the cable can someone give me some info or a website or anything to help me out



__________________
all in balls out racing
magnumandthor

Expert Poster

Status: Offline
Posts: 260
Date:
Permalink  

maybe motion pro could make up a new one for you??? or figure out a different application that would be longer. dont really have a good answer

__________________
SkidooKID

Amateur Poster

Status: Offline
Posts: 75
Date:
Permalink  

http://www.firstplaceparts.com/13592.html

__________________
Sluiter242

Amateur Poster

Status: Offline
Posts: 77
Date:
Permalink  

It's not really a stupid design......one is the oiler cable and one is the throttle cable. You can try searching the forums like Totallyamaha, Amsnow, Snowest and Evilbay and see if you can get a used set from a Mountain Max or Mountain Viper. You can definately get aftermarket stuff from any distributer......I use www.richmotorsports.com. A word to the wise though......if you are going 6" higher you'll also need a brake line. Good luck!

Oh, and one other thing.....the steering stem on the early models were very weak at the top right under the plate. It's just welded under the plate and when you put a big riser on it they snap right off....guaranteed. You need to get a riser out of a 2000 and newer proaction sled because they are reinforced and they wont break. Take it from me, when your bars snap off while you are going down the trail it's more excitement than you are looking for.  I have a reinforced steering stem out of a sled I junked that I'll sell for $40. I'll bring it to the races when I get this damn cast off my arm!



-- Edited by Sluiter242 on Wednesday 7th of September 2011 10:48:37 AM

__________________
lsf_champ_22

Pro Poster

Status: Offline
Posts: 1088
Date:
Permalink  

i would like to run a 6 inch riser with sno cross bars so if you think about it its only going to be about another 3 or 4 inches higher than stock b/c the stock bars drop down and the sno cross bars dont..... and powermadd makes a extention kit but they dont have a duel cable one only a single cable extention like skidookid showed... im wondering if i could just buy two of them one for each cable and run it that way?



__________________
all in balls out racing
lsf_champ_22

Pro Poster

Status: Offline
Posts: 1088
Date:
Permalink  

?



__________________
all in balls out racing
Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.
CNYMRA Main Page -> CNYMRA Classifieds -> CNYMRA Classifieds -> need yamaha snowmobile help
Tweet this page Post to Digg Post to Del.icio.us